文章基本信息

标题：Optimization of compaction pressure on brick
本地全文：下载
作者：Ade Indra ; Edison Edison ; Hendri Nofrianto 等
期刊名称：MATEC Web of Conferences
电子版ISSN：2261-236X
出版年度：2018
卷号：215
DOI：10.1051/matecconf/201821501025
语种：English
出版社：EDP Sciences
摘要：Bricks are one of the building materials that serves as a wall or anchoring the load. Therefore, it must be made according to the standards. In our previous observations, many found bricks were traditionally not quality, because the process of making bricks that are not right. Bricks are a class of ceramic materials that must be hard and should not be crushed when immersed in water. The method in this study focuses on optimizing compaction pressures, with printed pressures that are varied in MPa units. The results obtained as follows, in terms of mechanical properties of Compressive Strength increases with the addition of compaction pressure, an increase of 36% (brick becomes strong). In terms of physical properties of Density increased (porosity becomes smaller). For Suction rate down, this shows less water absorption. The results obtained in accordance with national and international quality standards.